Handmade Beads

by Patti Vanderbloemen

Boy...it has been quite some time since I have blogged here! It feels good to be back! :)

Personally, I have an affinity towards handmade beads - all mediums. I don't know about you, but I cannot count the number of "subscribed lists" I have signed up for to arrive in my email inbox, but I do at least glance at each and every "blog type" email that pops up in my mailbox feed -- always on the lookout for inspiration.. One of my favorite's is the Interweave Blog.

A couple of weeks ago, Tammy Jones had a post related to 1-hour rings.  In this post was a quick, down and dirty tutorial to make a sterling silver ring that resembled bamboo (if interested, here is the link to that blog post). The tutorial (by artist Elizabeth Ann Tokoly) starts with a sterling silver ring already soldered and formed. After reading through the steps involved, I felt a thick gauge wire would work best - so I grabbed 6 gauge.

I will say, the making of this ring took me 1 hour and 45 minutes - but that included forming the ring from such heavy stock - I had to anneal the metal several times just to get it formed for soldering. And then anneal several more times AFTER the soldering to get it round and to the correct size (why didn't I just grab 8 gauge?) :) Also, it is a bit cumbersome to saw the score lines around the ring - but it can be done.

 Anyway, it is a COOL ring, which I have gifted to a friend. (Forgive the picture quality - I just took a quick picture for reference purposes only).

This technique would be AWESOME for a bangle - which I will try in the future. In the meantime, I thought I would try making a little bead using this technique. For this bead, I grabbed some thick-walled sterling tubing.

I roughly measured the bead length to 3/4".

Cut the tubing to size using my tube cutting jig and jeweler's saw.

I made two little "end caps" for the bead by using my disc cutter and some scrap silver sheet - it's 18 gauge sheet, so it is thick.

I used medium silver solder paste to attach the first end cap to the tube - this is my set up.

After pickling - you can see that the excess overhang of the disc needs filing.

I used my ring clamp to stabilize the bead against my bench pin while I quickly filed away the excess silver.

The picture below is a bit blurry, but I filed the disc / end cap to be flush with the tubing.

Never EVER solder a hollow bead without first making a hole to allow steam to escape when soldering. Though I have not done it myself, I have read where nasty accidents can happen if the escape hole is not in place before closing up this hollow form. I simply put my bead in my vice and drilled a hole.

Second disc/end cap solder set up.

Pickled, then filed the second end cap / disc flush to the tubing/bead, and drilled the final hole.

Really hard to see in this picture, but I scored two parallel lines close to the ends of each bead, using my jeweler's saw - again using my ring clamp to hold the bead while sawing.

Now - this next step is the reason I used thick walled tubing. I used my tiny half round file to make four slight indentations around the middle of the bead.

I cleaned up the the bead with a pumice wheel on my flex shaft. (These are the pumice wheels I use).

Patina added (I use Midas Black Max - link here), buffed with steel wool, and tumbled. Liver of Sulfur works just as well, but Black Max is quicker and does not stink.  :) Always a plus!

One more tiny tip  (and of course, I forgot to take a picture). Before you tumble the bead, add the bead to a piece of wire (copper - it's cheap) and loop the ends. This will keep the shards of shot from getting stuck inside the bead while tumbling (this I have done...takes forever to release that shot!)

Now, this is not a perfect bead, but I rather like the organic look to this shape - would look great as a single bead on a bracelet, two beads for earrings, or even an entire chain if you have lots of time on your hands to create! Total time to make this bead for me (not including tumbling) was about 30 minutes.  So, while this technique is a bit time consuming, it is handmade and definitely not made in China! 

Anyway, the making of this bead was the bit of inspiration I need to kick off this brand new year. I wish you all a very Happy New Year!

Thanks for stopping by!

Terra Rustica Studio GIVEAWAY!

Carol Dekle-Foss

A short and sweet post from me. A giveaway, from my hands to yours.  

How to win? Simply leave a comment here or on our facebook page. I want to know how you handle stressful times. What do you do that is positive to calm your nerves? I personally venture out into wilderness and vanish among the mountaintops. When I was a young girl and things were stressful or scary, I would climb the tallest tree I could find and sit there for hours.  I would return home with the sweet smell of sap stuck to my fingers and a renewed sense of courage and hope.🌲

Lake Tahoe, Emerald Bay

I found such solace and peace in those moments, so it's no wonder I escape to the wilderness during uncertain times still to this day. As much as I would love to climb trees, I settle now for just taking their photos.

Winner will be selected on Wednesday, November 23rd, and announced on the Love My Art Jewelry facebook page.

One winner will receive all beads and pendants pictured.

We are having a sale in our Etsy ceramic bead shop! Enjoy 25% off your entire order with coupon code, AUTUMN25.

Dia De Los Muertos inspiration..and latest fall porcelain creations

Carol Dekle-Foss

The colorful shades of autumn and the crisp air have finally arrived here in Northern California. This is my absolute favorite time of year for so many reasons. My creative juices are alight with fire and I find myself losing time playing in the studio.

This creative stirring has been very productive!

For one, I have accepted Karen's Dia De Los Muertos, a celebration of life challenge. Are you participating? We would love for you to join us! For me, this holiday was somewhat of a mystery. I knew the basics, but to help me with what I wanted to make for the challenge, I set out to learn more about this special occasion.

Some very cool facts I found interesting:

The Ofrendas or altars, are built inside and are decorated with many obejects, including the loved one's favorite items, photos, Cempasuchil or Marigold flowers, pan de muertos and sugar skulls. The children's altars are decorated in a special way to include miniature toys, tiny food etc. The Marigolds are also used in many other ways including decorating the graves. 

They widely display beautiful Papel Picado, or cut paper banners. I love the fact that there are still artisans in Mexico that hand cut these banners. Here's a short video in English on the history the Papel Picado if you're interested.

I think what amazes me most about this beautiful tradition, is they portray the dead as humorous, happy, and fun, and not macabre in any way.  Also that the children are included in the celebration honoring their deceased loved ones. I have a new appreciation for this holiday, and plan to attend a local celebration to learn more. Here is a list of events in the United States as well as a few abroad if you are interested in attending one. How amazing would it be to go to one of these celebrations in Mexico!

  I was so inspired by Sherri's shrinky dinks and hand-drawn shoes that I thought I would try and draw my own sugar skull. I used common motifs and then embellished with a bit of my style. 

These pendants will be included in a shop update tomorrow. 

 

I think they are adorable! I've saved a few for the challenge, and will probably end up keeping the finished pieces to wear during Dia De Los Muertos.

Here are some new designs coming out of the kiln as well.

 I love the intricate stained glass look of these leaves.

And more leaves.

Another skull design.

Ronnies beads. He nailed the fall colors!

All beads and pendants shown will be included in the shop update that will be happening tomorrow.

We hope you join us for the Dia De Los Muertos challenge! You can find out more details here.

Stacking ring love..and necessary tools.

Carol Dekle-Foss

I'm obsessed with making stacking rings! I think it's because there are so many design possibilities. I like that any small charm can be converted into a solderable, then be combined with different gemstones and metal textures to make a unique, one-of-a-kind ring. I have so many designs in my head right now!  Here are some newer ones I've made and also some I've made in the past. 

My lotus charm with textured bands and a white topaz faceted gemstone.

I'm in love with this little owl! I just sawed off the jump ring that was attached to the top of his head. The cabochon is mother of pearl.

 One of my cherry blossoms combined with berry wire.

I use a ton of different tools when making rings, but here are my favorites and the ones I can't live without.

This file rocks! It files so smooth, like a babies bottom:)

Very accurate ring sizing chart.  

Pepe ring mandrel. I recently purchased one of these and love it! My other ring mandrel completely destroyed the insides of my rings.

Flat and half-round pliers. I use these to round together the ring band wire to be soldered.

Maun flat-nose urethane parallel pliers:  I have no idea how I lived without them. The urethane even stands up to my abuse!

Digital calipers from Harbor freight. 

Mounted sandpaper roll, 400 grit. For sanding the insides of ring shanks.

AdvantEdge pumice wheel. I use the knife edge to remove metal under the charms so the ring bands fit snugly.

Locking head tweezers. They keep everything held in place and at a 90 degree angle.

Rotating soldering table. With the locking head tweezers, and this table, I can easily look at all angles of the ring to make sure its lined up and ready for soldering. Sorry, I should have taken a photo of a ring about to be soldered!

Photo courtesy of Rio Grande

My newest favorite tool! A stone-setting system.

Tube setting a faceted gemstone like the one above can be challenging. I've chipped way to many using a regular bezel pusher, so I decided to give this stone-setting system a try. It works like a charm and very easy to use. It pushes in the sides of the bezel wall evenly so the gemstone sets perfectly. I love it! Melissa Muir has an extremely helpful video on how to tube set if your interested in learning. Thank you Melissa!!! 

Sending positive thoughts and safe wishes to those in the path of this monster of a hurricane!

Sterling Silver Solder Filled Wire??

by Patti Vanderbloemen

While trolling the Rio Grande website one evening, I found a "new-to-me product" (no idea how long Rio has had this in stock, but I had never seen it):  Sterling Silver Solder Filled Wire (link here).  I tend to solder my jump rings when attaching a clasp, and I like to make my own chain...when I can. This name says it all - solder filled. So in theory, just make a jump ring, flux, fire...boom - closed jump ring.

Now I have tried fusing fine silver wire in the past for jump rings and chain, and for every 6 rings I would attempt to fuse, 3 would burn up in my way-too-hot flame, or I would not pull the flame away quick enough. Epic fail. I do know that practice makes perfect, but,I thought I would give this wire a try. Cost wise, the SS Solder Filled wire (as of this writing) is about $2.10 more per troy ounce than .925 Sterling Silver round wire.  I ended up purchasing 1 troy ounce of 18 gauge.

This is the description of the wire from Rio's website:

Solder-filled silver wire is a tri-metal wire: a solder core surrounded by a copper shell and a fine silver outer layer (solder core: 6%; copper and fine silver shell: 94%). The overall composition is sterling, but the fine silver outer layer provides a better finish and luster than sterling silver. The core eliminates the need for additional solder, simplifying production. This wire is ideal for making chains and jump rings. Simply flux and use. 

I not only wanted to test the ease of use, but also the strength. So, I chose an "ancient" chain link that really puts the links through the wringer. This is not really a tutorial for making the links, but rather I wanted to illustrate the steps I used to check the strength of this wire. The 18 gauge SS Solder Filled Wire is softer than .925 Sterling Silver wire, has a bright and shiny fine silver finish, and is very nice to work with.

This is the chain link I made and the design for this link is typically made from 20 gauge - but hey - I had 18 gauge!

I used one of my dapping punches that was approximately 1/2" wide to form a coil for my rings.

As everyone knows, anytime a join has to be soldered, it must be a PERFECT join. This is especially true for using this wire (and fusing fine silver jump rings, as well). After sawing out the rings, I set them up assembly-line style on my charcoal block, sprayed with Pripps flux, and proceeded to move the flame slowly around each ring. I will say - MUCH EASIER to get the solder to flow with this wire than to fuse fine silver wire.

Because the outer layer of the wire is fine silver, there was no fire scale (no pickle/clean up required) - and that is a huge PLUS.

Strength Test Number 1: To begin forming the links, place the jump ring near the bottom of round nose pliers and pull gently to make an oval shape.

In the picture above, the solder join is inside that little yellow circle. This area will receive the most stress from shaping the round link into an oval, thus a perfect test for the strength of this wire. 

Not every jump ring I made was perfect....which is why I chose this chain to test the strength of the wire.  Seriously - must have a perfect join before soldering!

Once you have formed the oval shape, grab the oval in the center and pinch with the round nose pliers to make a "bow tie" shape.

Turn the link around over the round nose pliers and bend it closed.

No...it's not perfect in my picture...I tweaked the shape a bit after wards!

Once you have your links formed, feed one looped end of one link through both looped ends of another ring, and rotate the links until they are "nestled".

Strength Test 2: I looped a small piece of copper wire to one end of my chain to act as a pulley and proceeded to pull the chain through successive holes in my draw plate. 

I ended up pulling the chain through 5 holes in the draw plate - from larger hole to smaller hole - which not only tested the strength of the links, but it really fine tuned each link so that they were the same size.

I have made this chain several times over the past couple of years, using 20 Gauge Sterling Silver wire. But, I wanted to make a comparison to the Solder Filled wire, so I made a few similar links using 18 Gauge Sterling Silver wire.

After forming my jump rings around the same mandrel, I took a teeny tiny piece of hard solder (for color matching purposes, there is more silver content in hard solder so I typically grab that box first).

Now, I forgot to take a picture but trust me - each link required a soak in pickle and clean up - something I DID NOT have to do with the SS Solder Filled Wire. Also, there is a reason this chain should be made with 20 gauge wire if using Sterling. The sterling silver - even though dead soft and heated (annealed) becomes very hard very fast.  

The image below shows the chain made with 18 gauge SS Soldered filled wire on the top (notice that beautiful shine) and 18 gauge sterling silver on the bottom.  The chain made with the 18 gauge SS Solder Filled wire is much more fluid.

Top Chain - made with 18 Gauge SS Solder Filled Wire
Bottom Chain - made with 18 Gauge .925 Sterling Silver Wire 

I ended up making myself a little bracelet with the completed Solder Filled Chain. I oxidized the chain first, tumbled, then I simply wired a pretty Silver-Flanked Orange bead from Tibet as my focal. I also added a little extender chain, made from jump rings - soldered closed - so that this bracelet is adjustable. 

I may actually keep this bracelet for myself, as I really do like the links on this chain.

I will definitely use this solder filled wire again - especially when I need a secure closure, such as a soldered jump ring for clasps, etc.

So tell me - have you experimented with any new materials lately? If so - please share, as I am always on the lookout!

Thanks so much for joining me today - have a great week!