Showing posts with label enamel. Show all posts
Showing posts with label enamel. Show all posts

Tuesday, August 25, 2015

Happiness is......

a returning customer.

by MaryAnn Carroll

Today I just want to share a little bit about what my friend and LMAJ associate, Karen McGovern, does with discs that I create specifically for her two or three times a year. What I love about working with Karen is that she gives me lots of freedom and doesn't put limits, directions, expectations, etc. on the custom order. I am not one for custom orders because I am a little obsessive and worry that things will not turn out okay. They tend to take me twice as long.  I prefer to create freely without the unpleased customer's fictitious voice echoing in my head, "that's not what I envisioned, wrong color,  I don't really like that... etc."

Karen simply let me know that she didn't need any reds or yellows. I forgot about the yellow part between the message I read upstairs in my house and the walk to the basement where my very messy studio is! Whoops! It's the old being in your 50's thing. You'll see a couple yellows below. I am not a fan of yellow, so it isn't something I tend to favor, unless it has earthy tones to it.

She did tell me the she gravitated toward the discs that are the light caribbean blue, so I decided to make lots for this order in various sizes. The discs range from eensy weensy (1/4") to large (1 3/8"). It is actually those two sizes that are the toughest to enamel. The larger take longer and many coats to achieve a rich color and with the smalls, you have to be careful to be fast, so that the copper doesn't melt in the flame. The color can disappear from that size in a couple of seconds as well as the disc itself!

Here is what I finished up last night.




What I find amazing is how Karen uses these in so many different ways. I think anyone that see her work would agree that she is incredibly talented.










And some of my favorites.....




Karen also offers a tutorial about one way to use discs.

You can find that HERE. You can also find more from Karen on Facebook. 





Sunday, July 8, 2012

Copper Tube Cutting Tutorial.....

MaryAnn Carroll
Lately, I have been spending my time cutting, sanding and enameling copper tubes. My husband Bill did me the favor of cutting LOTS of different sizes for me with a power saw. As you can see they still need to be sanded before I begin enameling. I am also finding that I love the long narrow tubes the most, so I'll need more of those. I can cut those myself since the copper is soft and easy to cut. If you stick around reading this post, I'll show you how to make your own little tubes.


Prior to me wanting large quantities of tubes, I purchased a small tube cutters for under or around $10 at Lowes. These come in various sizes. Today, I am going to show you how simple it is to make your own small tubes with this little tube cutter.


First, a few tips....  I've learned that copper tubing, for the most part, comes with two different wall thicknesses. The thicker (type L) is generally used for plumbing and the one that I have found works best (in my opinion) is type M which weighs less, is easier to cut and works great with enamel.

Here is the 1/4" copper tube that I have. It comes in rolls and you can get quite a few beads out of a roll. This can be purchased at Lowes, Home Depot and online. Prices are very reasonable.


You will also need a ruler and a permanent marker. Please excuse the dirty ruler....  I didn't realize how bad it was until I got up close and personal with these photos!!


Now, you are all set. Just straighten out the portion of tubing that you want to use. This is very pliable and straightens by hand. Sometimes, I lightly tap it with a hammer and block. Simply mark off where you want to make your cuts.


Here is a view from the top. The pipe is about 1/4" in diameter. Insert the tube in the cutter and turn the knob so that it is snug against the tube. Rotate the cutter once around the tube. Once rotated once, tighten again and rotate. Continue that same pattern until the cut is finished. Make sure the blade it is snug against the tube after each rotation, but not too tight. You will get a feel for it with practice.


Here is a view from the side. You can see the blade touching the cutter. Continue to rotate and tighten (not too tight or it will smush!!!)


This is a view of the tube which has almost been cut through. A few more rotations and the tube will fall off.


And... here you have it! Two freshly cut tubes....


And, what can you now do with them? Well, if you are like me, you will enamel them. But, like anything copper, there are so many other options as well......

Have fun!



Note: When working with wire and enameled copper tubes, beads, etc., take great care as the wire/copper friction increases the chances of chipping 

As always, thank-you for supporting artists who create handmade with handmade,

MaryAnn

PS Don't forget to check out this month's Strut Your Stuff challenge as well as our double giveaway. Information can be found on the sides.

Saturday, December 10, 2011

work as meditation

mary jane dodd

'there is no enlightenment outside of 
daily life.'
~ thich nhat hanh
making components for me is mindfulness at its best... 

 while one gets into a meditative 'flow' 

conscious choices are being made

  and a perfect balance is struck... 

 hours passing by with purpose
until night when you look back and know that your time was well spent
in more ways than one... 

wishing you peace this season... 

Thursday, September 22, 2011

guest post - barbara lewis

mary jane dodd


In case you hadn't heard, Barbara Lewis has a new book! We asked her to talk with us a bit about the experience:



"This is the BLAD, which stands for Book Lay-out and Design.  It's the tool that the sales staff at North Light used to sell the book.  The publisher selects a few pages from the book and creates a booklet.  It was interesting for me to see it, so I thought you might be interested too.  I had no idea how the publishing industry worked, and still don't know it from the viewpoint of someone in the profession.  But it's been a real eye-opener, in a good way.  North Light has been great to work with, but the person who most affects your experience is your editor.  Your editor does everything … includng making airline and hotel arrangements!  When I found out that my editor, Rachel Scheller was only 24 years old, my jaw nearly hit the table!  Rachel is so impressive. I can't imagine anyone else doing a better job!  She deserves a big fat raise!

~
~

The last few weeks have been a whirlwind! Now we’re entering a new phase
where YOU get to be drawn into the vortex! I mean, why should I be having all the
fun? We’re launching the Virtual Book Tour for “Torch-Fired Enamel Jewelry: a
Workshop in Painting with Fire” on October 5. From October 5th to the 24th, a
bunch of blogging friends, many of whom you already know and admire, will host
a specific day during the tour where they’ll share their interest in the book, or in
torch-firing, or in using torch-fired enamel beads and other elements.


We’ll have prizes at every stop. All you need to do is to leave a comment and
become a follower of the blog of your host or hostess and become a follower of
my blog. Everyone who leaves a review of the book at Amazon by November 24
will be entered into a Grand Prize drawing for a Torch-Firing Kit ($110 value). It’s
important that the review be honest … we need the book to stand on it’s own merits.


You say you already have a torch-firing kit? Well then, you’ll get a $110 gift
certificate for my website, Painting with Fire Artwear.com. I’ll have all the details
at my website on October 5, but I thought you might like to know who the hosts will
be of the Book Tour. Here’s the roll call … Mary Jane Dodd, Gaea Cannaday, Linda
Larsen, Andrew Thornton, Lori Plyler, Diane Cook, Lori Anderson, LeAnn Weih, Jen
Judd Velasquez, Melissa Meman, Lisa Crone, Shannon LeVart, Cindy Wimmer, Laura Twiford, Erin Prais-Hintz, and Jennifer Cameron.


What you’re not going to hear is a bunch about me. Andrew will host an interview
with me, but other than that, you’ll hear a lot about how each of these artists are
interested in or work with torch-fired enamel. Expect to see some really neat
enamel work as seen through their vision. Our Resident English Teacher, Erin Prais-
Hintz, will talk about the book as only she can! We’ll have a downloadable project on
Lori Anderson’s day ... and lots of other fun stuff. I hope you’re getting the idea that
it’s a “not-to-be-missed” event! See you then!"




To learn more, you can follow these links:
blog: www.paintingwithfireartwear.blogspot.com
website: www.torchfiredenameljewelry.com
store: www.paintingwithfireartwear.com
face
Related Posts Plugin for WordPress, Blogger...