Showing posts with label etching. Show all posts
Showing posts with label etching. Show all posts

Tuesday, February 24, 2015

TUTORIAL TUESDAY! Etching Aluminum by Karen McGovern

Want to come over to my place to see my etchings?

I recently had a virtual conversation with Staci Louise Smith about etching.  She is going to describe her project in a later post—it’s amazing and beautiful and you all will love it.

In the course of the conversation I decided to do a tutorial on etching aluminum.  There are many ways to etch brass, copper and silver, but few options when etching aluminum.  I will be showing how to etch with ferric chloride. 

YES, ferric chloride is a caustic material that has to be disposed of in a VERY RESPONSIBLE MANNER, and yes, there are “green” etch recipes all over the web, but many do not work with aluminum.  I do have the recipe for a green etchant that works with aluminum, but haven’t tried it yet because I haven’t found a source for some of the ingredients.  When I do, I’ll be sure to post it.  This tutorial will discuss the proper handling and disposal of ferric chloride, which easily etches copper, brass and aluminum beautifully.

Etching has been around forever.  Ferric chloride historically has been used in the computer and electronics world to etch copper mother boards, among its many uses. Use the Google Machine and you will find loads of videos and tutorials on how to etch copper and brass with it.

Aluminum is a whole other ball game.  If you were/are into crazy science experiments, you will love etching aluminum.  It’s FAST (less than two minutes usually) and a bit scary (can you say CHEMICAL REACTION?), and the results are pretty great.

Aluminum will not patina conventionally like other metals.  By its very nature it will not rust, tarnish or discolor. Coloring this material is difficult using conventional methods and requires effort to keep the color you achieve if you use inks, dye patinas, etc.  Ferric chloride will permanently color and etch aluminum in a dreamy, monochromatic way.  Let’s give it a go, shall we????

First, the scary disclaimers and safety stuff:

1.    WORK IN A VENTILATED AREA, LIKE OUTDOORS.  For real.  Do not use ferric chloride in a room without TONS of ventilation because, HYDROGEN GAS.  Hydrogen gas is NOT TOXIC, and a small amount is produced when you etch aluminum with ferric chloride and it is pretty startling the first few times you do this.  EXCITED YET?  I etch in my garage with the doors wide open.

2   Use rubber gloves (I use surgical gloves which you can get at any pharmacy) because you will be handling the ferric chloride coated metal more than you would etching copper or brass.  Ferric chloride won’t burn you on contact or anything like that, but it isn't the best thing to have on your skin for prolonged periods and it does stain EVERYTHING (clothes, counter-tops, concrete, you name it) so bear that in mind.

3.   Wear a mask if you have one, just to be extra safe. You can find bulk, inexpensive  disposable painter’s masks at any hardware store.

4.      Wear safety glasses.  YOU DO NOT WANT FERRIC CHLORIDE IN YOUR EYES!!!

5.     Spent and neutralized ferric chloride must be stored properly and disposed of at a recycling center in the same manner spent oil from your car is recycled.  I keep a few empty plastic jugs in my garage, fill them with spent FC using a plastic funnel, and then take them to my local recycling center when full.  FC must be kept in plastic containers!

My FC storage jug.

 Okay, terrified yet?  Don’t be.  FC is scarier sounding that it is.  I promise.

What you’ll need:

Aluminum bracelet blanks.  I get mine from Gotta Get A Deal on Etsy.
Ferric chloride.  I get mine from Allied Electronics, but you can also find it at places like Radio Shack or other electronic supply stores. (Note: When you get it, take a few minutes to read the information that comes with it.  Familiarize yourself with this liquid as much as you can prior to use.)
Three empty plastic containers with lids large enough for your blank to sit in.
Packing tape
Sharpie marker and/or Staze On Ink (Michaels Crafts)
Rubber stamps of your choice (Michaels)
Sanding sponges and polishing cloths
Newspaper
Baking soda
Old towel or washcloth




Here we go!  Cover your work space with newspaper.  It is nice to have a sink nearby just for easy access to water.  When I etch with aluminum I set up right next to my shop sink in the garage.  The sink itself is heavy plastic and meant for grungy work.  Fill one plastic container with fresh water, one with enough FC to cover your bracelet blank, and leave one empty.  You don’t need to fill the container with FC, just a couple inches in the bottom so that you can immerse the aluminum easily.  Set them up in a row--FC, plain water, then the empty container.

I have found that these Band Aid plastic containers are perfect for etching cuffs!
Left to right, FC, water, and empty container.  Baking soda ready to go!

Clean your bracelet blank using a sanding sponge or fine steel wool. Stamp or draw a pattern with Staze On ink or a Sharpie, let dry completely.  Cover the back of the bracelet blank with packing tape, leaving a long tail on either end.  Fold over a bit of tape on either end to act as “handles” so you can easily dip and lift the bracelet blank in and out of the FC.  Be sure the tape is flat and covers the back of the blank completely.  Use a pen or chopstick to burnish the tape to the back.  You do not want any FC getting under the blank!

Put on your rubber gloves. Hold the tape by either end and immerse the blank, stamped side UP, into the FC, covering completely.  Immediately lift it out of the FC, holding it over the container.  LET THE FIZZING BEGIN!!!  FC reacts instantly with aluminum.  The fizz is the production and release of harmless but kind of scary hydrogen gas.  You will smell it and the metal will actually get warm. I count to between 20-25 seconds in my head..  Basically I wait until the surface of the metal begins to really fizz and the metal gets warm. Immerse the aluminum in the container of clean water.  Lift out immediately, and immerse in the FC again, lifting out right away.  FIZZZZZZZ, count to 20 or o, then dunk in the clean water container.  I do this three or four times depending on the thickness of the aluminum, which will turn BLACK at this point.  Run your gloved finger over the design, you will feel it when it is etched enough.  FC will LITERALLY DISSOLVE ALUMINUM.  I learned this the hard way the first time I etched aluminum.  I left the blank in the FC like you would copper or brass (around 20 MINUTES) because I was too impatient to actually READ ABOUT THE PROCESS.  When I came back I pulled up the tape and THERE WAS NOTHING THERE.  Just a foamy pile of goo on the surface of the FC.  SMH.  Stupid. 

Here are a couple videos of the process. In the first video you will see that I dipped the blank a couple times in the FC to get the FIZZ started. I was using fresh FC and it took a few seconds to "bite" the metal and begin the process.




Anyway, at this point you will say to yourself, “What have I done?” because the aluminum will be a dull, deep black and look ruined.  FEAR NOT!  Place it in the empty plastic container and dump some baking soda on it to completely neutralize the FC.  Some fizzing will occur.  Rinse it in the sink under running water.  You have neutralized the FC on the metal with the baking soda, so it is now harmless and can go down the drain as you rinse. I keep a bristle scrub brush in my sink and use it to scrub the surface of the metal, the black will go away as you scrub.  You can also use a soft wet/dry sanding sponge here. You want all the black to be gone, and the etched surface to begin to shine. Rinse well, remove and discard the packing tape. You can also take your gloves off now.




Now for the REVEAL.  Dry the metal. Using a very fine grit sanding sponge, clean the surface of the blank.  The black is gone, and your stamped pattern will shine up beautifully. Anywhere the etchant touched will now be a matte misty grey.  Once you have revealed the etched pattern, you can then polish with a polishing cloth.  Bend the cuff using your handy dandy bracelet bender or a bracelet mandrel and you are DONE!!!  I use a steel bracelet bender from Gotta Get A Deal in my vise. Bends a cuff into the perfect oval shape in SECONDS. I love this thing.





Cool!!!  As you can see, I chose a wheat pattern stamp for this cuff.  TIP: I went over the stamped image with a fine line Sharpie, filling in any areas I wanted darker, or that I missed when I stamped the blank. 

Voila!

Now, you do not have to dispose of all of your FC every time you use it.  The container holding just FC can be closed and saved to use again and again. It is good for multiple etchings.  You will know when it is spent when it takes longer and longer to actually etch.  At that point I dump in some baking soda,then dump the mix into a plastic jug.  You do need to neutralize and dispose the water you used to dunk the bracelet in as you etched.  Add some baking soda and pour this into your storage/recycle jug with any other spent FC.  Seal the jug and keep in the garage until it’s full (which will take a long time unless you etch a million things a day).  When the jugs are full take to a recycling center that also accepts things like paint, oil, etc.

Now, I promised that I would give away the cuff that I created for this tutorial.  Okay, here’s the deal.  You can win this cuff by posting a comment here about the scariest technique you mastered in your artistic journey.  Did you learn how to use a torch even though you are terrified you will burn your house down?  Spend your last buck on a kiln because you JUST HAD TO LEARN HOW TO MAKE CERAMIC BEADS?  Whatever it is, post it here and I will use some sort of computer program to randomly pick a winner on FRIDAY, FEB 27th.  Oh, AND SHARE THIS BLOG POST, OKAY??? Thanks. And good luck.  And don’t be afraid of etching, or kilns, or torches, or anything that stands between you and your artistic dreams.  Read, research, and DO IT. Now, GO MAKE SOMETHING AMAZING!

Wednesday, September 3, 2014

Finding Your Creative Muse

Carol Dekle-Foss

How do you deal with your creative muse? Can you summon it instantaneously and just begin working on your art? Or is it elusive and fleeting and require moments of solace and peace to show its face? I believe everyone has creative ability, and that some have no idea how talented they actually are. I think it's just a matter of slowing down, unplugging from all the chatter and listening to your inner muse.

We all have our own ways of invoking our creative force as well, be it lighting candles, playing music that lifts our spirits, or even well placed crystals or natural elements collected from a cherished family outing. What helps you to be creative?

My creative muse and I, well we have issues. Sometimes I have self-doubt about myself and my ability, and also, at times the need for perfection overrides my passion to explore and create. But...when I do create something that makes my heart sing, or if I get a compliment while wearing one of my pieces, well those moments make me feel validated as an artist, and give me that extra nudge to create even more.

If you are just starting out designing jewelry or you are trying to create and are in a rut, I invite you to look past your fears and self doubts. Don't worry about perfectionism, and start being open to what your muse is saying to you. Also, just enjoy the creative process. Grab a pencil and paper, and start drawing to see what happens!




I recently discovered or I should say rediscovered what makes my creative muse come out and play. I read that it's a good idea to draw out your jewelry designs. I never fully grasped this concept until I saw this image. I'm grateful to Erin Prais-Hintz for posting this drawing of her necklace and showing one of her creative processes. This picture made me have an aha! moment and helped me realize how to rekindle my inner muse. Thank you again Erin!



I take a journal everywhere now. I have one in my car, in my purse and also by my nightstand. You just never know when creativity will strike. Sometimes I will be driving down the road, working out, or just daydreaming and my mind will drift to a design I am working on. I immediately grab my journal or whatever I can find and start to draw.


For example, I was recently giving my chickens some treats and noticed my roosters tail feathers flopping in the wind. They were long and wispy, so I tried to capture them here in these earrings.

 He is a damn fine rooster isn't he? Such a sweet thing too, not aggressive at all. Although at times I would like to ring his neck for being so loud and annoying!



Here is another example of how drawing out designs was helpful. I have this mound of leather samples from my previous job and wanted to make bracelets from them. The problem is they are only 2.5" by 4" in size. TIP: If you are looking for leather, you can try furniture stores to see if they have any discontinued pieces.
So, while enjoying a cup of coffee this morning, I drew out this design. Drawing it out really helped to see what it would look like and also helped with the actual size because of the graph paper.


Here are a couple more designs showing how drawing helped with the overall creative process. 

The dragonfly necklace was at first supposed to be a ring and then by drawing it out I realized I should make a necklace instead.

I have no idea why the heck I keep creating with swirls and flourishes!











Etched nickel bracelet.
Necklace made with a raku bead from Star Spirit Studio.
 These earrings were originally going to be round! I didn't like how they looked on paper and changed the shape.



This Pleiades necklace took me about 4 drawings before I came to this design.
I would like to share this special box. It was a project in our last metal smith class. I etched the hand drawn image on copper, then fire-kissed it with a light torch flame. The location, Ruth's Pond, is special to my family, particularly to my mom. She passed away in 2004, and it was her favorite spot to go and have fun. I made the box as a tribute to her. She would have loved where my creativity has taken me and sometimes I even think she is here helping me along. I also engraved the inside with her actual handwriting. Hopefully my family will appreciate the box and cherish it as a family heirloom.

I hope this post will help you find and embrace your creative muse!

Some of the above designs are not listed on my website because I have been prepping like a madwoman for the American River Music Festival, my biggest event of the year.

 Over the last couple of months, I have been more focused on creating than marketing. My website has suffered. After the festival, I plan to find new ways to drive traffic to my site, and will share any that work. Stay tuned!

Saturday, December 10, 2011

work as meditation

mary jane dodd

'there is no enlightenment outside of 
daily life.'
~ thich nhat hanh
making components for me is mindfulness at its best... 

 while one gets into a meditative 'flow' 

conscious choices are being made

  and a perfect balance is struck... 

 hours passing by with purpose
until night when you look back and know that your time was well spent
in more ways than one... 

wishing you peace this season... 

Saturday, August 20, 2011

joys of learning/teaching

mary jane dodd


last spring, i got up the courage to ask a bead shop about 30 min from my home if i could propose classes for their schedule... and so i got to teach my first class... 

the fall schedule is getting ready and i wanted to come up with some fun classes that would not be too complex, yet would build on the basics of the etching class i taught this summer...

i wanted to use layering on a cuff, but to somehow do it a bit differently - after all, cuffs are very popular right now and they are the perfect kind of bracelet to use riveting on... resin is one of my favorite materials to work with - but ice resin (my resin of choice) takes a bit too long to work with in the time frame i will have available... 

enter staci's blog post from last week about magic glos... i picked some up... the sun broke through yesterday after a good number of days of rain - and so i was able to try it... this is definitely a resin that leaves you with a more rustic type effect, which is fine with me... and it was very well suited for my idea... 

i also tried it in some rustic bezels that i made and will offer instruction on... 


and then there will be a class on using a butane torch with sterling... making a rustic fused link bracelet along with things like ball end headpins, ear wires, clasps... just a practical class designed to expand one's ability to construct  their own components and save money... even learning how to ball end headpins is such a valuable skill in terms of design and cost... i remember being so excited to be able to do that and not have to buy headpins anymore... to never run out of them because i could always make more...


confidence grows when you learn how to do things, leaving you ripe to take on bigger challenges... it is a beautiful cycle, really.... learning how to do-it-myself has been really important to my growth... and you take it with you in to other parts of your life...

** etching is a really great technique... i first learned from stephanie lee's book 'semi-precious salvage'... but barbara lewis has a great section on it in her new book 'torch-fired enamel jewelry' ... perhaps i should do a tutorial on it... 




Saturday, June 25, 2011

student teacher

mary jane dodd

'curiosity is the wick in the candle of learning.'
~ william arthur ward


etching is one of my favorite techniques... you can take plain metal and give it a life of its own... at a bead shop i began noticing the possibilities for a lot of the components they had displayed - trays of vintaj, boxes of brass and copper shapes... so i asked if she would be open to an etching class...

the pieces above were made to place around the store so that people could see another side of what was available... i thought about just asking her if she would like me to etch some for sale... but i thought that teaching people how to do it would be so much more fun... 

and, girl, was it!


busy... i love that about classes... how focused everyone becomes...  how people talk and work together... these 7 wonderful women and i spent 3 hours together... (& i learned that 3 hours is not enough time...)


my favorite question - 'what if...'  it is drives me daily... and i love to hear/see that in others... learning something new by whatever avenue then integrating it into your personal arsenal is magical... 'what if... ' is why i keep a journal for my work - because surely i would forget everything that flits through my head... 

it was a fantastic way to spend my friday... i feel badly there are no images of finished work... i had forgotten about taking pictures  as the class went on... 
face
Related Posts Plugin for WordPress, Blogger...