Showing posts with label pricing. Show all posts
Showing posts with label pricing. Show all posts

Thursday, July 12, 2012

The Dirty M Word Part 2: How to use your average item price

Good Morning Class! Did you all complete your homework?

If you didn't, perhaps go back to this post and see how to figure out your average item price.

So let's discuss some questions you may have about how your average item price may/may not affect your sales.

1) How does my average item price affect my sales?

In short, it doesn't. What it does affect, is the type and quantity of work you make. It is merely an means, or production strategy to your end result, or your sales number.


2) My average item price is very low. How do I change it?

There are two ways to raise your average item price. The first is to make more product. This is a double edge sword because you'll have to make much more product. Let's take a look at the example I used last time, where our average item price was $10 and our sales were $1000.

Remember: SALES = Quantity(Average Item Price)

$1000=100(10)

That meant, you would have to sell 100 pairs of earrings with an AIP of $10 to have $1000 in sales. Let's say you adjust your inventory to your next show so your AIP is $20:

100(20)= $2000

Let's look at the ways we can increase our AIP:

a) Make MORE product of a higher price point. While a piece of jewelry that is lower priced may sell easier, you have to make a least twice or more of it to equal the same as selling one piece that  is more expensive.

b) Use more expensive/exclusive materials that can demand a higher price point. If you're producing in a large quantity, you can often buy more expensive materials in bulk without deeply cutting into your profit margin, but the market will dictate a higher price because you've used more costly or precious materials.

c) Check your inventory to make sure it is well rounded. Your average item price could be low because you've overproduced your more inexpensive items and overlooked more expensive items.

3)Should you always try to raise your AIP?

No, it may not always be to your benefit to raise your AIP. As an artist, you should look at all of the shows and sales you make and analyze both the sales, the show, and the type of customers that not only attend but also PURCHASE. If you sell at mostly church bazaars and small local shows, it may not be in your benefit to RAISE your AIP, because those shows may not bear the weight of a higher AIP. In contrast, those types of shows may also not have the SALES or Customers to justify the QUANTITY of a lower AIP.

DO YOU FIND THIS TYPE OF ANALYSIS HELPFUL? 


What questions do you have about SALES that I can help answer???

Tuesday, July 3, 2012

The dirty M word



The dirty M word.....

....Do I have your attention now? :)

Well, for all intense purposes, the dirty M word today is MATH. If you were thinking that it was MONEY, well they are bedfellows but today let's talk a little about MATH and a simple equation to help keep you on track preparing for shows.


As I prepare inventory for BeadFest in Philadelphia in August, a question that's often raised to me in conversation is, "How do you know how many beads to make?" The short answer, since it is my first time there, is that, "I don't."  Now, there's all kinds of equations I could use to try and figure it out but the one that I'm finding most helpful to keep me on track with production and keep my momentum going is this:


SALES = QUANTITY(AVERAGE ITEM PRICE)

Let's break it down:

Sales: Since I don't know what my sales will be, this number is the most enigmatic. I have nothing to base this number on in reality. I do have an approximate idea of what my budget and expenses will be and I do know how many other vendors as well as a round figure of attendees. So, this number is the variable. It could be low and it could be high....I won't know until after the show.


Quantity: This is the number I can most control. The number of beads I make has a direct impact, in terms of production anyway, that will determine my sales.


Average Item Price: This might be the most confusing part. Do you know your average item price? Your average item price is the median price point of what you are selling. If you add up the retail cost of all of your items (beads, in my case) and divide it by the number of items, you will have your average item price. 


For simplicity sake, if you sell earrings, some may be as high as $50 and some may be as low as $15.  If you add up the retail value of all of your earrings, we'll say $1000 and divide it by the number of earrings you have, let's say 100 items, you average item price is $10.




Let's plug that number in to our formula:

SALES =  100(10). So in this case, if you sold all 100 pairs, your sales would be $1000.




So, I'm giving you homework~


For next Thursday's post, I want you to find out the Average Item Price of what you make....and we'll discuss how we can impact our sales but increasing/decreasing our Average Item Price...and how you can use this number to help you plan your inventory for shows!






 

Sunday, March 13, 2011

"Wow!! That is Expensive!!!"

by MaryAnn Carroll

For any of us who make beads and/or jewelry, I would guess that this is a reaction that you have probably heard, whether mumbled to their friend or made directly to you at some time.

Well.... I say...

"You get what you pay for!"

After my most recent glaze firing, I was once again faced with the dilema of pricing.  I try to be fair, but also, I put a lot of time into my work to make a high quality product, so I'm not going to give them away.  What I do is this... I base my prices on the amount of time that I put into each bead.  Beads that are basic rounds with one glaze take the least amount of time so they are the least expensive.  If a round bead, however, is large, then it takes up more room in the kiln which means fewer beads in that firing (beads cannot touch each other during a glaze firing).  In that case, that bead would be priced higher do to that fact.


Then, we have the beads above which were created from porcelain clay at the same time.  They are basically the same size (I don't measure while making beads) and both glazed.  The beads on the right cost more than the beads on the left.  Although you might think that the beads on the left look like they have two glazes, they don't.  They have one glaze that "breaks" on the edge of a ceramic piece.  This simply means that while the glaze is melting in the kiln, certain areas will puddle in greater amounts and edges, bumps, etc. will not.  Both very cool.....  but the time invested was different.


And then we have these expensive little babies that you see above.  Well....I LOVE the look (picture doesn't do them justice, but the time invested far exceeds that of some of my other beads.... 


And they all came out of this little kiln shown above.  This is a doll kiln, which is perfect for the amount that I am able to create at one time.


I also own these ceramic beads above.  I believe that they are manufactured in China.  While there is nothing wrong with them and some do have some of the same effects as my handmade, they were most likely produced in a factory, which is why the price is considerably lower than handmade ceramic beads.


Those, most likely, came from a kiln such as the one above.

So.... I hope that you learned a little more about why those of us who create handmade might need to charge more......

Like they sometimes say, "Wow!!  That is expensive!!"

I say.......

"Yup! You get what you pay for."

To see a funny little video about pricing at shows, click HERE for one of Patty's posts.

face
Related Posts Plugin for WordPress, Blogger...