Showing posts with label macarroll beads. Show all posts
Showing posts with label macarroll beads. Show all posts

Friday, October 9, 2015

Hanging my head and hoping for the best......

by MaryAnn Carroll

For those of you that know me, you know that I am a resource teacher and do my jewelry and bead making part time. Four and a half years ago I stopped selling beads online after a tragic event sent my life into a tail spin. I won't launch into that story here because I couldn't possibly cover it in a paragraph or two. Once things started to slow down from that a year later, I just didn't have it in me to list anything anymore.

There was a time that I did very well selling beads and so so selling jewelry. I opened an Indiemade shop, but get virtually no business from it. It wasn't the site, it was me. I just didn't want to promote, take pictures, list, write descriptions, etc. to sell. The time has come for me to stop avoiding what I remember being a lot of work and get back into the bead business. I've probably written about this exact same topic before, but this time I am feeling the push to do so.



My goal is to retire at the end of the 2018 school year. I will be 58.  I am in my 31st year right now. I have been lucky to have a job that I like for the most part. It's a little scary to think about not having the same income. I have all of these thoughts running through my head.....

What is something happens to my children or grandchildren and I cannot help? Are they going to be okay? What if this? What if that?

I need to STOP!!! and remember the advice that I always offer others. Most things in life are out of our control and it is rarely the things that we try to control that end up being something that we are faced with.

So, with my retirement goal in mind, I need to get ahead financially. I thought Handmade at Amazon was going to be the boost that I needed to start selling again. I do want to do this full time when I retire from teaching.

So, I signed up and was accepted. Well, it turns out since I sold a half dozen things on Amazon in 10 years, I have a seller account. It would not let me set up shop. I spent way too many hours on the phone and on the internet trying to take care of this glitch.....


.....only to find out from my friend Staci Lousie Smith, who, if you know her, you know that she knows the ins and outs of online anything, that they aren't taking beads and components at this time. Why the heck did they accept me?

They launched yesterday and sure enough I didn't see beads and components. I did see the number 43,000 or something close to that next to jewelry and I was like..... NO WAY!  I cannot compete with that. Hopefully, I will be over all of my frustrations by the time Amazon decides to include components.

So today, I am hanging my head when I say that I am going to give in and start my Etsy store back up. I left Etsy as soon as they included manufactured items, and in all honesty, when I searched for ceramic beads just the other day I was a little appalled at what I was up against, but I am going to give it a shot again.

So, Etsy, here I come..... for a while anyhow. I will wait to see what happens on Amazon and maybe I will make the switch. But for now, I am motivated to start selling again.

assorted porcelain beads

wood-fired stoneware beads

porcelain beads with shino glaze


porcelan beads pistachio shino glaze


I also checked out examples of what you will see when I get started back up!
I hope that ceramic beads are still in style......



Wednesday, April 18, 2012

From Porcelain to Wood-fired...

MaryAnn Carroll

Often times, we forget that buttons can be used in our creative jewelry designs. These fabulous designs were shared with me by Karen Park. In two of her three designs shown here she used my porcelain buttons to complete her very unique beaded bracelets. The bead work is amazing. I love these and wanted to share them.


 

To see more of Karen's work you can visit her 



And.... one of my most exciting times of the year is when my husband Bill is getting ready to stoke up the wood-fire kiln. I am so grateful that I am able to have this experience. I am also grateful that I am not the one out there all day (often in the cold) when he is firing. I do visit him and bring food, but I know if it weren't for him this is not something I would do on my own. I admire those that do. The work that goes into this process is amazing as are the results of what comes out of the kiln. With him retiring from 33 years of teaching art in the Syracuse City School District, he will finally now be able to do what he loves.... pottery, painting, wood-working and I'm sure he will find that there are many artistic ventures that he will partake in.

Here are some pictures of my beads mixed in with some very awesome pottery. The kiln will not be opened until tomorrow so this is the closest we could get for now. The grayish colors that you see on the beads are ash from the wood. Once removed from the bead trees, I'm sure what will be seen is a mix of gorgeous colors created with the glaze as well as a mix of ash. Clicking on any of these pictures will offer you a closer look at the beauty of wood-fire.





The picture below shows the backs of a few beads that have very little ash effect, but will have some.


The kiln...


And... before you head off to another blog, please remember to check back today to see if you won the earrings giveaway. The winner will be posted on the side bar.


To see more of Bill's work and learn more about wood-firing, you can visit his website SplitfirePottery.

As always,

Thank-you for supporting those who create handmade with handmade.

Wednesday, December 21, 2011

This time last year....

by MaryAnn Carroll

I really wanted to own a Swanstrom disc cutter.  The issue was..... buying it without charging it.  I've been working very hard the past couple of years to not pull out a credit card.  If I don't have the money, I usually refrain from buying it. So.... back in September I decided to do something unique for me and save money.  Bill gave me what I was unable to save as an early Christmas gift, so this year I was able to buy my new disc cutter. 

I read many reviews on this and others before deciding that I wanted this one.  I made the right choice.... as far as I know since it works like a charm.  The price was up there, but I'm anticipating that I will be able to make up for that next year by creating components, etc. for others to purchase.  Bill has decided to retire this June when the school year is over and, although we have been working on how we will make extra money after retirement, it seems to have come a little more suddenly.  That's okay.... I'm a risk taker at heart so I'm sure that this risk is something that we will do okay with. I'll write more about that as we get closer.  I'm hoping that he builds a gas kiln to help the "in between wood-firings" and I'll be able to get beads into those firings as well.

So....  This is just how my new cutter looked when I took it out of the box.... (top pictures from Riogrande)....


I figured I might as well purchase the die set too.... as this point... cha-ching... it was already adding up....
 And here is how it looked last night while I scramble to get my Christmas gifts made.  I'm hoping to finish the components for  everything tonight....  Theme:  Keep it Simple :o)

I'm a messy artist....  I did clean before starting this project the other day.....



And, I LOVE IT!!!!  I'm still experimenting with my enamels and a few other techniques, but that is the fun of it for me.  If you do decide to purchase this, remember that you will need some other items that you might not have.  In my case, I had none of the below....

brass hammer


urethane mat


lubricant


My advice would be to watch the two short videos at on the Riogrande site before making your decision.  The total cost (with everything I purchased for this) came to over $400.  I was searching for coupon codes. I called the company and there aren't any for this product.  
So, I'm hoping that I will have some beautiful creations to share in the near future.

Thank-you for supporting those who create handmade with handmade.

MaryAnn

Friday, August 19, 2011

A Beginner Teaching a Beginner Tutorial....

by MaryAnn Carroll

So, I'm new to this enameling art and I've got to say I am really enjoying it.  What I think I like the most is that I can create pendant style pieces to coordinate with my ceramic beads.  I've decided to keep this a "semi" silent tutorial ;o)  ...one without words.....  one where I hope the pictures say all of the words.... 

If they don't, however, please feel free to leave a comment asking me anything that you have a question on.  I will be happy to answer asap.

The earrings....
They are reversible if you know how to switch around the ear wire.  If you like the side with a more solid color look like this....

or....  the backside like I prefer....
just simply reverse the ear wire and you have an entirely new set!

The style below is made in the same way, but I've kept this set closer to the actual enamel colors before I decided to use my artistic license with the torch ;o)


Let's get started....









I guess I will add a few words here for safety reasons:

Please keep in mind that the set up that I have include fire bricks which are the same bricks used to build my husband's wood-fire kiln.





Repeat until you get the desired colors.











Some smaller steps were left out.  Please feel free to ask if there is anything that you want to know. You can leave a comment and I will respond or contact me at artisanbeadsplus@gmail.com

Please check out the following sites for more about enameling:


Here is are a couple of great tutorials by Barbara Lewis:



 
~thanks for reading~

MaryAnn
face
Related Posts Plugin for WordPress, Blogger...